Overview for the Spectra GL612 Grade Laser
The Spectra GL612 is a rugged, automatic self-leveling laser with a working range of up to 2,600 feet. Used in a wide variety of grading, excavating and alignment applications, this construction rotary laser includes a HL750 laser receiver that provides PlaneLok and grade matching for increased accuracy in slope measurement.
Featuring single grade capability of ±25%, the GL612 grade laser self-plumbs in the vertical position to allow bolt installation, form, tilt up, and curtain wall plumbing. With an intuitive keypad and graphic display, it also delivers self-leveling accuracy of 1/16th inch, making it ideal for agricultural and construction applications. You can mount this device vertically or horizontally on a 5/8-11 tripod.
Spectra HL750 Laser Receiver
The included HL750 laser receiver provides a digital readout of elevation and can be used at an operating diameter of up to 2,600 feet. It features an anti-strobe detector that prevents false readings from site strobe lights. The readout is displayed on its large front and rear LCDs and shows exactly how far the elevation is from on-grade. Accurate measurements can be made without moving the rod clamp, saving time and increasing productivity. Selectable units of measure can also be displayed in millimeter, centimeter, feet, inches or fractional inches.
Wireless communication between the Spectra HL750 laser detector and the GL612 laser provides automatic grade matching, which allows measurement of unknown grade values between two points. For applications that require maximum stability and accuracy, the PlaneLok feature is available in both horizontal and vertical planes and automatically locks the beam on the receiver and keeps it on grade, reducing typical environmental factors that may cause an error.
Allowing the use of multiple lasers onsite, the GL612 features a mask mode that eliminates interference with other crews. It also includes a RC602 radio remote control that gives you full control of the laser from up to 330 feet away. Electronic leveling vibration filter reduces vibrations typically experienced on tall tripods, in high winds or on high vibration jobsites. Incorporating automatic temperature and grade compensation, this Spectra Precision laser level delivers highly accurate results in any weather or geographical location.
With an IP67 rating, the GL612 laser level is protected against dust and water immersion and can even survive a drop of up to three feet on concrete! This grade slope laser works up to 35 hours using rechargeable NiMH batteries and approximately 40 hours using alkaline batteries.
This Spectra grade laser package comes with a HL750 laser receiver, remote control, rod clamp, carrying case, NiMH rechargeable battery pack, charger, AC power cable and a 5-year manufacturer’s warranty.
Features for the Spectra GL612 Grade Laser
- 2,600 foot operating range
- Single grade to ±25 %
- HL750 laser receiver
- Grade matching measures and displays the existing grade
- PlaneLok automatically locks on the laser beam
- Mask mode for using multiple lasers onsite
- Electronic leveling vibration filter
- Automatic temperature compensation
- Radio remote control
- 5/8-11 tripod thread
- 40-hour battery life
- Water resistant and dustproof to IP-67
- Withstands a 3 feet drop onto concrete
- Graphic LCD display and keypad
Specifications for the Spectra GL612 Grade Laser
|Exterior||2,600 ft (792 m)|
|Self Leveling||± 14°|
|Battery Life with Rechargeable Battery Pack||35 hours|
|Battery Life with Alkaline Batteries||40 hours|
|Power Source||Rechargeable NiMH or alkaline batteries|
|Battery Life Alert||yes|
|Display||Backlit, graphic LCD|
|Drop Damage Protection||3 ft onto concrete|
|Protection Class||IP67 (dustproof and water submersible)|
|Tripod Adapter (Center Screw Thread)||5/8-11 horizontal and vertical|
|Detecting Indicator||LCD indications and LED flashes|
|Adjustable Rotating Speed||300, 600, 900 rpm|
|Weight||6.8 lbs (3.1 kg)|
|Remote Control Operating Distance||330 ft (100 m)|
|Horizontal||1/16” per 100 ft (1.5 mm per 30 m)|
|Storage||-4°F to +158°F (-20° to +70°C)|
|Operating||-4°F to +122°F (-20 °C to +50 °C)|
|Beam Operating Modes||Beam masking|
|Transferring Points from Floor to Ceiling||yes|
|Machine Control of Excavators, Graders, Dozers or Similar Equipment||yes|
|Installation of Interior Fittings (cabinets, lighting, windows, countertops, etc.)||yes|
|Short-Range Leveling for Decks, Patios & Swimming Pools||yes|
|Installation/Leveling Interior Walls||yes|
|Installation/Leveling Ceiling Grids||yes|
|Squaring and Layout of Partitions, Walls & Tile Floors||yes|
|Concrete Forms, Footings and Foundations||yes|
|Checking Elevations of Sub-Base and Sub-Grade||yes|
|Short-Run Vertical Alignment||yes|
|Checking Building Square & Area||yes|
|Estimating Cut & Fill||yes|
|Matching Existing Slope & Grade||yes|
|Locating Finished Floor Levels||yes|
|Accuracy||1/8” per 100 ft. (3.0 mm per 30 m)|