Overview for the Northwest Instrument NRL800X Single Grade Laser
The Northwest Instrument NRL800X is a rugged, single-grade construction grade laser equipped with tilt sensors and servo motors that ensure automatic and accurate leveling. With a working range of up to 2,000 feet, it includes an NLD5G laser receiver for digital readout of measurements and two beams for versatility in leveling concrete forms and plumbing.
Engineered with cutting-edge electronic Servo Auto Level System, the NRL800X grade laser is the ideal tool for leveling, alignment and dual beam squaring for both level and plummet. This rotary laser features grade capability of ±8% and has a self-leveling accuracy of 1/16th inch per 100 feet.
For indoor and outdoor applications, just set up the NRL800X within a wide range of ±5 degrees and the servo motors will find the level automatically.
Northwest Instrument NLD5G Laser Detector
The included NLD5G laser receiver allows construction professionals to locate the laser beam easily in bright lights and over long distances. It features dual front and back LCD displays and has easy-to-see arrows that can be read indoors or outdoors indicating the position of the detector. With the press of a button, you can choose accuracy between fine and coarse mode. It can be held by hand or rod mounted with an adjustable rod clamp that fits most leveling rods up to 2 to 1/2-inch wide.
Bump sensor prevents costly mistakes if the NRL800X laser is bumped or out of place. This Northwest laser level also has an out-of-range alarm that beeps and blinks to inform you when it is out of range. The included NRM800 remote control gives you full control of the laser from far away.
With an IP54 rating, this rotary laser level is protected against dust and water splashes .It uses NiCad batteries and works up to 15 hours on a single charge.
This NWI grade laser package comes with a NLD5G laser receiver and rod clamp, remote control, grid target, laser glasses, hard carrying case, rechargeable battery pack, battery charger and 3-year manufacturer's warranty.
Features for the Northwest Instrument NRL800X Single Grade Laser
- 2,000 foot operating range
- Single grade up to ±8%
- NLD5G laser receiver
- Included remote
- Horizontal and plummet laser beams
- Bump sensor and out-of-range alarm
- Multiple rotating speed
- Graphic LCD display and keypad
- 15-hour battery life
- Water resistant and dustproof to IP-54
- 5/8-11 tripod thread
Specifications for the Northwest Instrument NRL800X Single Grade Laser
|Exterior||2000 ft (609 m)|
|Self Leveling||± 5°|
|Battery Life with Rechargeable Battery Pack||15 hours|
|Power Source||NiCad batteries|
|Battery Life Alert||yes|
|Display||Backlit, graphic LCD|
|Bump Sensor (H.I./Out of Position Alert)||yes|
|Protection Class||IP57 (dustproof and water splashes protected)|
|Tripod Adapter (Center Screw Thread)||5/8-11|
|Adjustable Rotating Speed||0-600 rpm|
|Weight||12 lbs (5.4 kg)|
|Horizontal||1/16” per 100 ft (1.5 mm per 30 m)|
|Vertical||1/8” per 100 ft. (3.0 mm per 30 m)|
|Operating||-14°F to +104°F (-10 °C to +40 °C)|
|Transferring Points from Floor to Ceiling||yes|
|Installation of Interior Fittings (cabinets, lighting, windows, countertops, etc.)||yes|
|Short-Range Leveling for Decks, Patios & Swimming Pools||yes|
|Installation/Leveling Interior Walls||yes|
|Installation/Leveling Ceiling Grids||yes|
|Squaring and Layout of Partitions, Walls & Tile Floors||yes|
|Concrete Forms, Footings and Foundations||yes|
|Checking Elevations of Sub-Base and Sub-Grade||yes|
|Short-Run Vertical Alignment||yes|
|Checking Building Square & Area||yes|
|Estimating Cut & Fill||yes|
|Locating Finished Floor Levels||yes|
|Accuracy||1/16” per 100 ft (1.5 mm per 30 m)|