Overview for the Topcon DL-502 – Electronic Digital LevelTopcon DL-502 – Electronic Digital Level
Topcon DL-500 series digital levels maximize work efficiency and minimize human error, providing consistent measurement precision and speed, regardless of operator skill.
Incorporating cutting-edge Random-Bidirectional (RAB) coding technology, an optimized digital processing algorithm, the Topcon DL-500 provides exceptional measurement accuracy,
stability and speed, under a variety of environmental conditions. Even when the staff surface is partially shaded, or in dim lighting conditions as low as 20 lux, a single button triggers measurement and the Topcon DL-500 instantly provides reliable results.
The world's first "Wave-and-Read" technology provides an additional survey style option that allows a rod operator to wave the staff forward and back, instead of keeping the staff plumb. This simpler method is faster, easier, minimizes the fatigue and is just as accurate.
Pre-installed measurement programs assist various leveling tasks and accompanied calculations. Internal memory stores field data, and can be directly transferred to your computer via serial cable, eliminating human error.
Calculates elevation of foresight (FS) with reference to backsight (BS) elevation. Elevation of the turning point (TP) is used for a new backsight, allowing for consecutive leveling.
Cut and Fill
Cut and fill stakeout routines facilitate slope work. Measurement can be taken with 0.1mm or 1mm (0.001ft. or 0.01ft.) resolutions.
Automatically displays the height difference between backsight (BS) and foresight (FS) in 0.1mm or 1mm (0.001ft. or 0.01ft.) unit.
Two measurements provide a ceiling height; one with a staff placed on the ground, the other with an inverted staff put onto the ceiling. Ceiling elevation can also be calculated with reference to the benchmark elevation.
One Button Triggers Measurement and Data Storage
- 0.6mm/0.8mm Height Accuracy
- “Wave-and-Read” Technology Guarantees
- Easy and Accurate Measurement
- Pre-installed Measurement Programs
- Height Difference Measurement
- Inverse Staff Reading for Ceiling Height
- Internal Memory
Single Button Operation!
After focusing on the staff, just press one button. The DL-Auto levels require you to read the graduations on the staff eliminates misreading and reduces operator’s eye fatigue.
Maximum Reliability! Field-proven Compensator
Incorporating a field-proven pendulum compensator with magnetic damping system, the DL-500 provides the stability you need when working on busy roads or bridges subject to vibrations.
Measures Ceiling Height! Inverse Staff Reading
The DL-500 can read the RAB-code staff in the inverted position.This feature dramatically facilitates height measurement of ceilings, tree branches, road signs, bridges, tunnel crowns, and other structures.
The World’s First “Wave-and-Read” Technology
The DL-500 tracks the RAB-code staff when waved forward and back, and automatically reads the correct height. The reading is at the minimum when the staff stands vertically, and the DL-500 automatically finds the least value of staff readings. This technology eliminates the need for keeping a staff plumb, further enhancing work efficiency and measurement accuracy.
Practical Measurement Programs!
No Need for Calculators Onboard programs support various measurement routines such as elevation, height difference, ceiling height, as well as cut/fill and stakeout in horizontal distance.
Internal Memory and Easy Data Transfer!
DL-500 stores the data for up to 2,000 measurements.DL TOOL software transfers data to your computer in CSV format, via serial cable.
- DL-502/503 Digital Level unit
- BDC46B Li-ion battery
- CDC68 charger
- EDC113AC power cable
- Hex wrench
- Vinyl cover
- User manual
- Carrying case